Risk Analysis in the Palm Oil Harvesting Process Using the Mix Method (Case Study at PT XYZ South Kalimantan)
Abstract
The harvesting process in oil palm plantations is one of the critical stages that greatly affects the productivity and quality of production results. The risks that arise in this process, both from operational risks, environmental risks, and human resource risks can have a significant impact on operational efficiency. This study aims to determine the level of risk in the harvesting process of oil palm products at PT XYZ South Kalimantan and to find out the proposed improvements that are in accordance with the problems faced using the mixed method, which combines qualitative and quantitative techniques. The results of the study showed that there were three levels of risk with the highest risk values. Namely the risk of work accidents with a risk value of 20 and a high risk level, the risk of damage to harvesting equipment with a risk value of 10 and a moderate risk level, and the risk of replacing harvesting equipment with a risk value of 10 and a moderate risk level. These three risks are risks with the highest priority level of handling. For this reason, it is recommended to focus on human control and SOPs, control of tools and procedures, and change management. With proper risk management, the harvesting process can run more efficiently, safely, and sustainably.
Downloads
References
R. H. V. Corley, “How Much Palm Oil do we need,” Journal Environmental Science and Policy, vol. 12, no. 2, pp. 134-139, 2009, doi: https://doi.org/10.1016/j.envsci.2008.10.011
U. A. Hanifah, S. I. Nastiti, and I. Andes, “Penerapan Produksi Bersih pada Industri Kelapa Sawit di PT YZ,” Jurnal Teknologi Industri Pertanian, vol. 32, no. 1, pp. 1-11, 2022, doi: https://doi.org/10.24961/j.tek.ind.pert.2022.32.1.1
A. Muhamad, and M. D. Desak, “Strategi Komunikasi Pemasaran Digital dalam Meningkatkan Minat Pariwisata Pulau Pari (Mix Method: Exploratory Sequential Design),” Jurnal Ekonomi dan Manajemen Teknologi (EMT), vol. 6, no. 2, pp. 342-350, 2022, doi: https://doi.org/10.35870/emt.v6i2.689
H. Legisnal, et. al.., “Penerapan Metode Reliability Centered Maintenance (RCM) pada Mesin Cake Breaker Conveyor di Pabrik Kelapa Sawit (PKS),” Jurnal Teknik Industri Terintegrasi, vol. 4, no. 2, pp. 21-28, 2021, doi: https://doi.org/10.31004/jutin.v4i2.3220
S. Rizky, and Sofiyanurriyanti, “Analisis Pengendalian Mutu pada Asam Lemak Bebas Minyak Kelapa Sawit Menggunakan Metode SQC,” Jurnal Teknik Industri, vol. 8, no. 1, pp. 59-66. 2022, doi: 10.55826/tmit.v2i2.71
S. A. Efi, et. al., “Pelatihan Teknis Penentuan Matang Panen Kelapa Sawit untuk Mahasiswa,” Jurnal Deputi : Derma Pengabdian Dosen Perguruan Tinggi, vol. 5, no. 1, pp. 366-373, 2025, doi: 10.54123/deputi.v5i1.402
M. Hermanto, and W. Edi., “Analisis Efisiensi Metode Panen Manual dan Mekanisasi pada Produksi Kelapa Sawit,” Botani : Publikasi Tanaman dan Agribisnis, vol. 2, no. 2, pp. 1-11, 2025, doi: https://doi.org/10.62951/botani.v2i2.288
Agronomy. SOP for the Harvest Process, PT XYZ, Jakarta, Indonesia: MCAR, 2012, pp. 1-22.
R. N. Wahida, “Konsepsi Manajemen, Manajemen Mutu dan Manajemen Mutu Pendidikan,” ALACRITY: Journal of Education, vol. 2, no. 1, pp. 26-34, 2022, doi: https://doi.org/10.52121/alacrity.v2i1.53
N. R. Alvi, B. Arrizqah, and E. R. Dyah, “Analisis Total Quality Management (TQM) dalam Meningkatkan Mutu Manufaktur dan Jasa pada PT. Dahana (Persero) Subang,” Jurnal Ilmiah Bidang Sosial, Ekonomi, Budaya, Teknologi, dan Pendidikan, vol. 1, no. 12, pp. 2917-2926, 2022, doi: https://doi.org/10.54443/sibatik.v1i12.475
M. Dewi, et. al. “Implementasi Manajemen Operasional Terhadap Penyelesaian Masalah di PT Toyota Motor Manufacturing Indonesia,” Jurnal Ilmiah Ekonomi Global Masa Kini, vol. 13, no. 02, pp. 115-124, 2022, doi: https://doi.org/10.36982/jiegmk.v13i2.2566
R. Hayatur, A. Karina, and H. Abdurrazzaq, “Optimalisasi Manajemen Risiko untuk Keberlanjutan Perusahaan Industri di Era Digital,” Jurnal Industri, Manajemen, dan Rekayasa Sistem Industri, vol. 3, no. 1, pp. 37-40, 2024, doi: https://doi.org/10.56211/factory.v3i1.559
A. U. Anita, and I. Taufiq, “Analisis Manajemen Risiko dengan Penerapan ISO 31000 pada Proses Machining (Studi Kasus: Perusahaan AB),” Integrasi Jurnal Ilmiah Teknik Industri, vol. 6, no. 2, pp. 42-52. 2021, doi: https://doi.org/10.32502/js.v6i2.3986
A. P. Maulana, W. R. Akhmad, and Hidayat,“Analisis Risiko K3 pada Pekerjaan Fabrikasi Konstruksi di CV. Arfa Putra Karya dengan Metode JSA (Job Safety Analysis),” Jurnal Teknik Industri, vol. 8, no. 2, pp. 314-323, 2022, doi: http://dx.doi.org/10.24014/jti.v8i2.19569
B. A. Muhamad, “Analisis Risiko Keselamatan dan Kesehatan Kerja (K3) pada Pengoperasian Reciprocating Compressor Menggunakan Merode Swift (Structured What If Technique),” Jurnal Teknik Industri, vol. 11, no. 1, pp. 49-58, 2021, doi: https://doi.org/10.36040/industri.v11i1.3413
S. Suardi, A. Fakhruddin, and K. D. Nurika, “Perkembangan Internasional Standard of Organization,” Jurnal Ilmiah Universitas Batanghari Jambi, vol. 23, no. 3, pp. 2625-2630, 2023, doi: http://dx.doi.org/10.33087/jiubj.v23i3.3411
Nucleus, ISO 9001 – Quality Management System, India, 2022
S. Arsyad, A. P. Bahariandi, and S. Ganda, “Mitigasi Risiko pada Proses Produksi Tahu Menggunakan Pendekatan Metode Failure Mode and Effect Analysis dan Risk Priority Number,” Jurnal Surya Teknika, vol. 11, no. 1, pp. 40-45, 2024, doi: https://doi.org/10.37859/jst.v11i1.7084
S. D. Ratna, et. al. “The Implementation of Operational Risk Management for Reducing the Risk Priority Number in the Metalworking Company,” Jurnal Teknik Industri, vol. 14, no. 3, pp. 130-139, 2024, doi: https://doi.org/10.25105/jti.v14i3.21404
M. A. F. Kemas, “Menghilangkan Keluhan Pelanggan dengan Menggunakan Teknik POKA-YOKE Sederhana Berbiaya Murah,” Jurnal Teknik Industri, vol. 17, no. 3, pp. 168-173, 2022, doi: https://doi.org/10.14710/jati.17.3.168-173
M. Darwin, et. al, Metode Penelitian Pendekatan Kuantitatif, Media Sains: Indonesia, 2021
Dahmiri, K. Idham, and O. Auliza, “Optimalisasi Strategi Pengembangan Industri Kecil Menengah Kreatif dengan Model Quintuple Helix Terintegrasi Teknologi Digital untuk Penguatan Smart City Berkelanjutan,” Jurnal Manajemen Terapan dan Keuangan, vol. 13, no. 4, pp. 1229-1241, 2024, doi: https://doi.org/10.22437/jmk.v13i04.37128
A. Muhamad, and M. D. Desak, “Strategi Komunikasi Pemasaran Digital dalam Meningkatkan Minat Pariwisata Pulau Pari (Mix Method: Exploratory Sequential Design),” Jurnal Ekonomi dan Manajemen Teknologi (EMT), vol. 6, no. 2, pp. 342-350, 2022, doi: 10.35870/emt.v6i2.689
S. B. Davide, et. al., “Flexibility and Resilience in Corporate Decision Making: A New Sustainability-Based Risk Management System in Uncertain Times,” Global Journal of Flexible Systems Management, vol. 22, no. 2, pp. 107-132, 2021, doi: https://doi.org/10.1007/s40171-021-00277-7
O. O. Oluwaseum, et. al., “CyberFusion Protocols: Strategic Integration of Interprise Risk Management, ISO 27001, and Mobile Forensics for Advance Digital Security in the Modern Business Ecosystem,” Journal of Engineering Research and Reports, vol. 26, no. 6, pp. 31-49, 2024, doi: 10.9734/jerr/2024/v26i61160
M. Marjiatul, E. Dira, and R. Nur, “Analisis dan Mitigasi Risiko pada Green Supply Chain Management dengan Integrasi Metode House of Risk dan Fuzzy Logic di PT XYZ,” Jurnal Integrasi Sistem Industri, vol. 12, no. 1, pp. 1-12, 2025, doi: https://doi.org/10.24853/jisi.12.1.1-12
M. K. Fajar, D. F. Lina, and A. P. Theresia, “Analisis Risiko Kecelakaan Kerja dengan Metode HIRARC (Studi Kasus: CV. Jaya Makmur, Samarinda),” Jurnal Ilmiah Teknik Industri dan Informasi, vol. 10, no. 2, pp. 66-74, 2022, doi: 10.31001/tekinfo.v10i2.1329
